广州粤佳环保科技有限限公司

MODEL: YJ-5GQ-A OPERATING VOLTAGE: AC90-260V/40-60HZ (IT CAN BE SUITED FOR ANY NATIONAL CIVIL VOLTAGE WITHOUT ANY VOLTAGE TRANSFORMER) POWER: ≤120W GAS SOURCE:DRIED AND CLEANING OXYGEN AND AIR OZONE PRODUCTION: 90% OXYGEN FLOW FOR 3L/min,OZONE PRODUCTION≥6G/H TEMPERATURE OF WORKING SITE: -10~45℃ HUMIDITY OF WORKING SITE: ≤85% OVERALL SIZE:36x22.5x29.5(cm) GROSS/NET WEIGHT: 8.8/8.0kg PRODUCT APPLICATION INSTRUCTION: YJ-5GQ-A WIDE VOLTAGE OZONE MACHINE is a human ideal equipment to do water treatment and air disinfection for civil projects; The products widely have been used to do air purification from room, and to eliminate pesticides from fruits or vegetables, also medical operating room, aseptic workshop, food processing, storage room, bacteria feeding room, farming, laundry shop, hotel, restaurant, center air condition system and so on. PRODUCT STRUCTURE: 1.All of the shell adopt 1.2 mm iron sheet with plastic coating, excellent shape, humanely design and durable 2.Triple number numerical control panel, operating time and circulation can be freely set 3.Manual adjustable mechanical potentiometer,5%- ozone production can be adjusted, ozone concentration and production also can be freely adjusted in accordance with customer’s demand; 4.Oxygen or Air can be freely used under customer’s demand due it with switch of Oxygen and Air 5.Power supply cable adopts plug design 6.The high voltage of internal machine is 4600V, So it can be opened only by specialist 7.Ozone generator of the machine meet European standard, excellent safety; no high voltage on the outside surface when it is operating, 8.Strong power DC fan, so it has efficient heating dissipation, and temperature of the ozone generator will not higher 5℃ than around 9.It adopts mute Air pressure pump, shockproof and low noise The equipment installation introduction: 1 step: The equipment should be placed in a place where must be dry cleaning and good ventilation, temperature will not more than 45℃ 2 step: Exit of the machine should be connected well with pipe, put the pipe in the place where need to do treatment 3 step: When gas source is AIR, please use plastic pipe to connect AIR OUTPUT and AIR/OXYGEN INPUT(IT ALREADY HAS BEEN DONE BY MANUFACTURER AT FACTORY),then take the switch to indicator of AIR; When gas source is OXYGEN , then the plastic pipe should be disassembled from AIR/OXYGEN INPUT, OXYGEN pipe should be connected on the exit of AIR/OXYGEN, take the switch to the indicator of OXYGEN; 4 step: Put on power after power cable has been connected, the machine will enter state of operating which will be appeared on screen in real time